inspur.ispim.edit_ntp module – Set NTP

Note

This module is part of the inspur.ispim collection (version 2.2.3).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install inspur.ispim. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: inspur.ispim.edit_ntp.

New in inspur.ispim 1.0.0

Synopsis

  • Set NTP on Inspur server.

Requirements

The below requirements are needed on the host that executes this module.

  • Python 3.7+

  • inspursmsdk

Parameters

Parameter

Comments

auto_date

string

Date auto synchronize.

Choices:

  • "enable"

  • "disable"

host

string

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

max_variety

integer

NTP Maximum jump time(minute),max variety(1-60).

Only the M6 model supports this parameter.

ntp_time

string

NTP time(YYYYmmddHHMMSS).

Only the M5 model supports this parameter.

password

string

Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

provider

dictionary

A dict object containing connection details.

host

string

Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.

password

string

Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.

username

string

Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

server1

string

NTP Server1(ipv4 or ipv6 or domain name), set when auto_dateis enable.

server2

string

NTP Server2(ipv4 or ipv6 or domain name), set when auto_date is enable.

server3

string

NTP Server3(ipv4 or ipv6 or domain name), set when auto_date is enable.

server4

string

NTP Server1(ipv4 or ipv6 or domain name), set when auto_dateis enable.

server5

string

NTP Server2(ipv4 or ipv6 or domain name), set when auto_date is enable.

server6

string

NTP Server3(ipv4 or ipv6 or domain name), set when auto_date is enable.

syn_cycle

integer

NTP syn cycle(minute),sync cycle(5-1440).

time_zone

string

UTC time zone,chose from {-12, -11.5, -11, … ,11,11.5,12}.

username

string

Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

Notes

Note

  • Does not support check_mode.

Examples

- name: NTP test
  hosts: ism
  connection: local
  gather_facts: no
  vars:
    ism:
      host: "{{ ansible_ssh_host }}"
      username: "{{ username }}"
      password: "{{ password }}"

  tasks:

  - name: "Set ntp"
    inspur.ispim.edit_ntp:
      auto_date: "enable"
      server2: "time.nist.gov"
      provider: "{{ ism }}"

  - name: "Set ntp"
    inspur.ispim.edit_ntp:
      auto_date: "disable"
      ntp_time: "20200609083600"
      provider: "{{ ism }}"

  - name: "set ntp"
    inspur.ispim.edit_ntp:
      time_zone: "8"
      provider: "{{ ism }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

Check to see if a change was made on the device.

Returned: always

message

string

Messages returned after module execution.

Returned: always

state

string

Status after module execution.

Returned: always

Authors

  • WangBaoshan (@ispim)